Due to the recent advancement in technology, there are several selections of re-greasing tools that a buyer can select from. It is quite important that potential users of these tools find out lots of valuable information on the ToolsInsider blog in order to handle the gun. Lack of proper knowledge or information can cause damaging effects to the device or might cause a complete breakdown or malfunction.
There are numerous styles of grease guns to select from; the most popular styles of guns include the pistol-grip, lever, hand grip, air-powered and battery-powered. Among all these styles, the lever style is the most cost-effective and most common style of gun.
Most grease guns have the capability to accept most fittings also referred to as a zerk. You want to ensure that these fittings are free from all dirt and debris. Endeavour to wipe out dirt from the fitting before attaching the tool. Ensure that the fittings are in a good working condition and replace damaged ones. Also, endeavor to clean the grease fitting after the lubrication. When using the tool, ensure that it is properly lubricated and apply it in the right order. You need to peruse through the ToolsInsider blog to get the proper information on what to do.
Cock the gun until you see the appearance of grease or the swelling of the sealing boot. You need to apply grease to the joints and avoid over-lubrication because it may cause damage to the boot. In addition, water or debris will flow into the tool and cause the breakdown of the joint.
When the gun is unfilled, depending on the style you are using, you may need to load it by either using a refill cartridge or via manual mode. Endeavour to clean the edge of the gun after completing the task. However, always keep in mind that you may need to always replace the grease fitting due to friction or dirt and debris blocking the fitting. Endeavour to consider the factors highlighted above before making a purchase. This will enable make a reasonable and informed decision.